Menghitung nilai Sin dengan sudut radian
program sin(x);
uses crt;
const pi = 3.14;
var
x,rad,p1,tot : real;
n,i,faktor,p2,j : integer;
tanda : byte;
begin
clrscr;
writeln(‘ Menentukan nilai sin(x)’);
write(‘Nilai x = ‘); readln(x);
write(‘Masukkan pangkat = ‘); readln(n);
rad := pi*x/180;
i := 1;
tanda := 1;
while i <= n do
begin
p1 := exp(i*ln(rad));
faktor := 1;
for j := 1 to i do
faktor := faktor *j;
p2 := faktor;
tot := tot + (tanda*p1/p2);
tanda := (-1)*tanda;
i := i+2;
end;
writeln(‘Sin(‘,x:5:2,’) = ‘,tot:5:2);
readln;
end.
Klo ada pertanyaan langsung di komen…
uses crt;
const pi = 3.14;
var
x,rad,p1,tot : real;
n,i,faktor,p2,j : integer;
tanda : byte;
begin
clrscr;
writeln(‘ Menentukan nilai sin(x)’);
write(‘Nilai x = ‘); readln(x);
write(‘Masukkan pangkat = ‘); readln(n);
rad := pi*x/180;
i := 1;
tanda := 1;
while i <= n do
begin
p1 := exp(i*ln(rad));
faktor := 1;
for j := 1 to i do
faktor := faktor *j;
p2 := faktor;
tot := tot + (tanda*p1/p2);
tanda := (-1)*tanda;
i := i+2;
end;
writeln(‘Sin(‘,x:5:2,’) = ‘,tot:5:2);
readln;
end.
Klo ada pertanyaan langsung di komen…
Menghitung Luas dan keliling lingkaran
Program Luas_dan_Keliling_Lingkaran;
uses crt;
const pi = 3.14;
var
r,K,L : real;
begin
clrscr;
writeln(‘=============================’);
writeln(‘Menghitung Luas dan Keliling’);
writeln(‘—————————-’);
write(‘Jari – jari = ‘); readln(r);
K := pi*2*r;
L := pi*r*r;
writeln(‘Keliling Lingkaran = ‘,K:5:2);
writeln(‘Luas Lingkaran = ‘,L:5:2);
writeln(‘=============================’);
readln;
end.
Klo ada yg belum dimengerti langsung j kasi komen…
uses crt;
const pi = 3.14;
var
r,K,L : real;
begin
clrscr;
writeln(‘=============================’);
writeln(‘Menghitung Luas dan Keliling’);
writeln(‘—————————-’);
write(‘Jari – jari = ‘); readln(r);
K := pi*2*r;
L := pi*r*r;
writeln(‘Keliling Lingkaran = ‘,K:5:2);
writeln(‘Luas Lingkaran = ‘,L:5:2);
writeln(‘=============================’);
readln;
end.
Klo ada yg belum dimengerti langsung j kasi komen…
Program Cek kelulusan dalam bahasa Pascal
program cek_kelulusan_siswa;
uses crt;
var
nama : string[25];
kelas : string[5];
no_absen : string[3];
n_tugas : byte;
n_u_hari : byte;
n_u_umum : byte;
rerata : real;
lulus : boolean;
predikat : string[20];
begin
clrscr;
writeln(‘====================================================’);
writeln(‘| Program Mengecek Kelulusan Siswa |’);
writeln(‘====================================================’);
writeln;
writeln(‘Input Data Siswa’);
writeln(‘—————-’);
write(‘Nama : ‘); readln(nama);
write(‘Kelas : ‘); readln(kelas);
write(‘No Absen : ‘); readln(no_absen);
write(‘Nilai Tugas : ‘); readln(n_tugas);
write(‘Nilai Ulangan Harian : ‘); readln(n_u_hari);
write(‘Nilai Ulangan Umum : ‘); readln(n_u_umum);
rerata:=(n_tugas + 2 * n_u_hari + 3 * n_u_umum)/6;
if rerata >=70 then lulus:=true
else lulus:= false;
clrscr;
writeln(‘====================================================’);
writeln(‘| Program Mengecek Kelulusan Siswa |’);
writeln(‘====================================================’);
writeln;
writeln(‘ Siswa dengan’);
writeln(‘—————-’);
writeln(‘Nama : ‘,nama);
writeln(‘Kelas : ‘,kelas);
writeln(‘No Absen : ‘,no_absen);
writeln(‘Nilai Tugas : ‘,n_tugas);
writeln(‘Nilai Ulangan Harian : ‘,n_u_hari);
writeln(‘Nilai Ulangan Umum : ‘,n_u_umum);
writeln(‘Rata – rata : ‘,rerata:0:2);
if lulus then
begin
if rerata < 80 then predikat:=’memuaskan’
else if rerata <90 then predikat:=’sangat memuaskan’
else predikat:=’dengan pujian’;
writeln(‘Dinyatakan Lulus dengan ‘,predikat);
end
else
writeln(‘Dinyatakan Tidak Lulus’);
readln;
end.
uses crt;
var
nama : string[25];
kelas : string[5];
no_absen : string[3];
n_tugas : byte;
n_u_hari : byte;
n_u_umum : byte;
rerata : real;
lulus : boolean;
predikat : string[20];
begin
clrscr;
writeln(‘====================================================’);
writeln(‘| Program Mengecek Kelulusan Siswa |’);
writeln(‘====================================================’);
writeln;
writeln(‘Input Data Siswa’);
writeln(‘—————-’);
write(‘Nama : ‘); readln(nama);
write(‘Kelas : ‘); readln(kelas);
write(‘No Absen : ‘); readln(no_absen);
write(‘Nilai Tugas : ‘); readln(n_tugas);
write(‘Nilai Ulangan Harian : ‘); readln(n_u_hari);
write(‘Nilai Ulangan Umum : ‘); readln(n_u_umum);
rerata:=(n_tugas + 2 * n_u_hari + 3 * n_u_umum)/6;
if rerata >=70 then lulus:=true
else lulus:= false;
clrscr;
writeln(‘====================================================’);
writeln(‘| Program Mengecek Kelulusan Siswa |’);
writeln(‘====================================================’);
writeln;
writeln(‘ Siswa dengan’);
writeln(‘—————-’);
writeln(‘Nama : ‘,nama);
writeln(‘Kelas : ‘,kelas);
writeln(‘No Absen : ‘,no_absen);
writeln(‘Nilai Tugas : ‘,n_tugas);
writeln(‘Nilai Ulangan Harian : ‘,n_u_hari);
writeln(‘Nilai Ulangan Umum : ‘,n_u_umum);
writeln(‘Rata – rata : ‘,rerata:0:2);
if lulus then
begin
if rerata < 80 then predikat:=’memuaskan’
else if rerata <90 then predikat:=’sangat memuaskan’
else predikat:=’dengan pujian’;
writeln(‘Dinyatakan Lulus dengan ‘,predikat);
end
else
writeln(‘Dinyatakan Tidak Lulus’);
readln;
end.
Penggunaan Record pada Turbo Pascal
uses crt;
type nilai = record
hari,tugas,umum,na : real;
end;
type mapel = record
kimia,basindo : nilai;
end;
type siswa = record
nama : string[25];
nis : string[3];
mp : mapel;
end;
var
i,n,a : byte;
student : array [1..100] of siswa;
stop : boolean;
b : string[4];
begin
stop := false;
Repeat
clrscr;
write(‘Banyak siswa : ‘); readln(n);
clrscr;
writeln(‘=======================================================================’);
writeln(‘NIS Nama Siswa Mata Pelajaran N.Hr N.Tgs N.Umum N.Akhir’);
writeln(‘———————————————————————–’);
a:=4;
for i := 1 to n do
begin
with student[i] do
begin
readln(nis);
gotoxy(6,a);
readln(nama);
with mp do
begin
gotoxy(26,a);
writeln(‘Bahasa Indonesia’);
with basindo do
begin
gotoxy(44,a);
readln(hari);
gotoxy(50,a);
readln(tugas);
gotoxy(57,a);
readln(umum);
na:=(2*hari+tugas+3*umum)/6;
gotoxy(65,a);
writeln(na:3:2);
end;
with kimia do
Download source code lengkapnya di sini
type nilai = record
hari,tugas,umum,na : real;
end;
type mapel = record
kimia,basindo : nilai;
end;
type siswa = record
nama : string[25];
nis : string[3];
mp : mapel;
end;
var
i,n,a : byte;
student : array [1..100] of siswa;
stop : boolean;
b : string[4];
begin
stop := false;
Repeat
clrscr;
write(‘Banyak siswa : ‘); readln(n);
clrscr;
writeln(‘=======================================================================’);
writeln(‘NIS Nama Siswa Mata Pelajaran N.Hr N.Tgs N.Umum N.Akhir’);
writeln(‘———————————————————————–’);
a:=4;
for i := 1 to n do
begin
with student[i] do
begin
readln(nis);
gotoxy(6,a);
readln(nama);
with mp do
begin
gotoxy(26,a);
writeln(‘Bahasa Indonesia’);
with basindo do
begin
gotoxy(44,a);
readln(hari);
gotoxy(50,a);
readln(tugas);
gotoxy(57,a);
readln(umum);
na:=(2*hari+tugas+3*umum)/6;
gotoxy(65,a);
writeln(na:3:2);
end;
with kimia do
Download source code lengkapnya di sini
Penggunaan If pada Turbo Pascal
Program Toserba;
uses crt;
var
pelanggan : char;
dis : string[3];
tot,blnja : real;
begin
clrscr;
writeln(‘ Dedix Toserba’);
writeln(‘=================================’);
write(‘Berbelanja sebesar = ‘); readln(blnja);
write(‘Pelanggan (y/t) ? : ‘); readln(pelanggan);
if pelanggan=’y’ then
begin
if blnja<=100.000 then
begin
tot := blnja -(10/100*blnja);
dis :=’20%’;
end
else
Download source lengkapnya di sini
uses crt;
var
pelanggan : char;
dis : string[3];
tot,blnja : real;
begin
clrscr;
writeln(‘ Dedix Toserba’);
writeln(‘=================================’);
write(‘Berbelanja sebesar = ‘); readln(blnja);
write(‘Pelanggan (y/t) ? : ‘); readln(pelanggan);
if pelanggan=’y’ then
begin
if blnja<=100.000 then
begin
tot := blnja -(10/100*blnja);
dis :=’20%’;
end
else
Download source lengkapnya di sini
Mencari nilai Sin(x) dengan x dalam radian
program sin(x);
uses crt;
const pi = 3.14;
var
x,rad,p1,tot : real;
n,i,faktor,p2,j : integer;
tanda : byte;
begin
clrscr;
writeln(‘ Menentukan nilai sin(x)’);
write(‘Nilai x = ‘); readln(x);
write(‘Masukkan pangkat = ‘); readln(n);
rad := pi*x/180;
i := 1;
tanda := 1;
while i <= n do
Download program lengkap ny di sini..
uses crt;
const pi = 3.14;
var
x,rad,p1,tot : real;
n,i,faktor,p2,j : integer;
tanda : byte;
begin
clrscr;
writeln(‘ Menentukan nilai sin(x)’);
write(‘Nilai x = ‘); readln(x);
write(‘Masukkan pangkat = ‘); readln(n);
rad := pi*x/180;
i := 1;
tanda := 1;
while i <= n do
Download program lengkap ny di sini..
Contoh penggunaan procedure pada Turbo Pascal
program Menu_Program;
uses crt;
var
a:byte;
i,n,x : integer;
sigmay,sigmax,ratax,ratay,sigma,sigma1,sigma2,cov,varian : real;
rerata,hsl : real;
procedure hapus_layar;
begin
clrscr;
end;
procedure mean;
begin
writeln(‘Menghitung Mean dari beberapa Data’);
writeln(‘———————————-’);
write(‘Masukkan banyak data yang akan di input :’);
readln(n);
sigma:=0;
for i:=1 to n do
begin
write(‘Input x’,i,’ :’);
readln(x);
sigma:=sigma + x;
end;
rerata := sigma/n;
writeln(‘Mean dari data – data terebut adalah ‘,rerata:5:2);
readln;
end;
procedure varians;
begin
writeln(‘Menentukan Varians’);
writeln(‘——————’);
write(‘Masukan banyak data : ‘);
readln(n);
while n<2 do
begin
writeln(‘Banyak data harus lebih dari 2′);
write(‘Masukkan banyak data : ‘);
readln(n);
end;
sigma1 := 0;
sigma2 := 0;
for i := 1 to n do
begin
write(‘Masukkan data’,i,’ : ‘);
readln(x);
sigma1:=sigma1 + x;
sigma2:=sigma2 + (x*x);
end;
hsl :=(n*sigma2 – (sigma1*sigma1))/(n*(n-1));
writeln(‘Varians = ‘,hsl:5:2);
readln;
end;
procedure covar;
var
x,y,px,py,k : array [1..100] of real;
begin
write(‘n = ‘); readln(n);
sigmax := 0;
sigmay := 0;
for i := 1 to n do
begin
write(‘x = ‘); readln(x[i]);
write(‘y = ‘); readln(y[i]);
sigmax := sigmax + x[i];
sigmay := sigmay + y[i];
end;
ratax := sigmax/n;
ratay := sigmay/n;
sigma := 0;
for i := 1 to n do
begin
px[i] := x[i] – ratax;
py[i] := y[i] – ratay;
k[i] := px[i]*py[i];
sigma := sigma + k[i];
end;
Download source code lengkapnya di sini..
Ini contoh prosedur program statistik..Keren kan..
uses crt;
var
a:byte;
i,n,x : integer;
sigmay,sigmax,ratax,ratay,sigma,sigma1,sigma2,cov,varian : real;
rerata,hsl : real;
procedure hapus_layar;
begin
clrscr;
end;
procedure mean;
begin
writeln(‘Menghitung Mean dari beberapa Data’);
writeln(‘———————————-’);
write(‘Masukkan banyak data yang akan di input :’);
readln(n);
sigma:=0;
for i:=1 to n do
begin
write(‘Input x’,i,’ :’);
readln(x);
sigma:=sigma + x;
end;
rerata := sigma/n;
writeln(‘Mean dari data – data terebut adalah ‘,rerata:5:2);
readln;
end;
procedure varians;
begin
writeln(‘Menentukan Varians’);
writeln(‘——————’);
write(‘Masukan banyak data : ‘);
readln(n);
while n<2 do
begin
writeln(‘Banyak data harus lebih dari 2′);
write(‘Masukkan banyak data : ‘);
readln(n);
end;
sigma1 := 0;
sigma2 := 0;
for i := 1 to n do
begin
write(‘Masukkan data’,i,’ : ‘);
readln(x);
sigma1:=sigma1 + x;
sigma2:=sigma2 + (x*x);
end;
hsl :=(n*sigma2 – (sigma1*sigma1))/(n*(n-1));
writeln(‘Varians = ‘,hsl:5:2);
readln;
end;
procedure covar;
var
x,y,px,py,k : array [1..100] of real;
begin
write(‘n = ‘); readln(n);
sigmax := 0;
sigmay := 0;
for i := 1 to n do
begin
write(‘x = ‘); readln(x[i]);
write(‘y = ‘); readln(y[i]);
sigmax := sigmax + x[i];
sigmay := sigmay + y[i];
end;
ratax := sigmax/n;
ratay := sigmay/n;
sigma := 0;
for i := 1 to n do
begin
px[i] := x[i] – ratax;
py[i] := y[i] – ratay;
k[i] := px[i]*py[i];
sigma := sigma + k[i];
end;
Download source code lengkapnya di sini..
Ini contoh prosedur program statistik..Keren kan..
Perkalian matrix
uses crt;
var
a,b,c : array [1..50,1..50] of integer;
i,j,k,x,y,z : integer;
begin
clrscr;
writeln(‘Ukuran matrix A’);
write(‘Baris : ‘); readln(x);
write(‘Kolom : ‘); readln(y);
writeln;
writeln(‘Ukuran matrix B’);
writeln(‘Baris : ‘,y);
write(‘Kolom : ‘); readln(z);
for i:=1 to x do
for j:=1 to y do
begin
write(‘Elemen A[',i,',',j,'] : ‘);
readln(a[i,j]);
end;
writeln;
for i:=1 to y do
for j:=1 to z do
begin
Download source code lengkapnya di sini
var
a,b,c : array [1..50,1..50] of integer;
i,j,k,x,y,z : integer;
begin
clrscr;
writeln(‘Ukuran matrix A’);
write(‘Baris : ‘); readln(x);
write(‘Kolom : ‘); readln(y);
writeln;
writeln(‘Ukuran matrix B’);
writeln(‘Baris : ‘,y);
write(‘Kolom : ‘); readln(z);
for i:=1 to x do
for j:=1 to y do
begin
write(‘Elemen A[',i,',',j,'] : ‘);
readln(a[i,j]);
end;
writeln;
for i:=1 to y do
for j:=1 to z do
begin
Download source code lengkapnya di sini
Unit Adjoin
unit adjoin;
interface
type matrix = array [1..10,1..10] of integer;
mi=record
e : matrix;
end;
min = array [1..10,1..10] of mi;
var
i,j,row,col,x,y,k,l : byte;
A : matrix;
function pangkat(var x,n : integer):integer;
procedure tukar(var a,b : integer);
procedure transpose(var A:matrix);
implementation
function pangkat(var x,n : integer):integer;
var
p,i : integer;
begin
p := 1;
for i := 1 to n do
p := p * x;
pangkat:=p;
end;
procedure tukar(var a,b : integer);
var
temp : integer;
begin
temp := a;
a := b;
b := temp;
end;
procedure transpose(var A : matrix);
begin
for i := 2 to row do
for j := 1 to (i-1) do
tukar(A[i,j],A[j,i]);
end;
procedure minor(var m : min; A : matrix);
begin
for i := 1 to (row-1) do
for j := 1 to (col-1) do
begin
x:= 0;
for k :=1 to row do
begin
x:=x+1;
y := 0;
for l := 1 to col do
begin
y:=y+1;
Download source code unit lengkapnya di sini
Pada unit ini juga terdapat prosedur pencarian determinan dan invers matrik..
Keren kan…
Komen yaw..
interface
type matrix = array [1..10,1..10] of integer;
mi=record
e : matrix;
end;
min = array [1..10,1..10] of mi;
var
i,j,row,col,x,y,k,l : byte;
A : matrix;
function pangkat(var x,n : integer):integer;
procedure tukar(var a,b : integer);
procedure transpose(var A:matrix);
implementation
function pangkat(var x,n : integer):integer;
var
p,i : integer;
begin
p := 1;
for i := 1 to n do
p := p * x;
pangkat:=p;
end;
procedure tukar(var a,b : integer);
var
temp : integer;
begin
temp := a;
a := b;
b := temp;
end;
procedure transpose(var A : matrix);
begin
for i := 2 to row do
for j := 1 to (i-1) do
tukar(A[i,j],A[j,i]);
end;
procedure minor(var m : min; A : matrix);
begin
for i := 1 to (row-1) do
for j := 1 to (col-1) do
begin
x:= 0;
for k :=1 to row do
begin
x:=x+1;
y := 0;
for l := 1 to col do
begin
y:=y+1;
Download source code unit lengkapnya di sini
Pada unit ini juga terdapat prosedur pencarian determinan dan invers matrik..
Keren kan…
Komen yaw..
Mencari Covarian
USES CRT;
var
n,i : integer;
x,sigma,sigmax,sigmay,ratax,ratay,cov : real;
procedure covar;
var
x,y,px,py,k : array [1..100] of real;
begin
write(‘n = ‘); readln(n);
sigmax := 0;
sigmay := 0;
for i := 1 to n do
Download program lengkapnya di sini ..
var
n,i : integer;
x,sigma,sigmax,sigmay,ratax,ratay,cov : real;
procedure covar;
var
x,y,px,py,k : array [1..100] of real;
begin
write(‘n = ‘); readln(n);
sigmax := 0;
sigmay := 0;
for i := 1 to n do
Download program lengkapnya di sini ..
Administrasi mahasiswa
Program Administrasi_Mahasiswa;
uses crt;
const
pkkspp = 400000;
infospp = 600000;
elekspp = 500000;
bogaspp = 450000;
ptikspp = 500000;
pkkprak = 100000;
infoprak = 500000;
elekprak = 450000;
bogaprak = 600000;
ptikprak = 350000;
sehat : real = 10000;
var
nm,jur : string;
nojur : byte;
tahun :integer;
spp,prak : real;
tot : real;
begin
clrscr;
writeln(‘Administrasi Mahasiswa Fakultas Teknik dan Kejuruan’);
writeln(‘===================================================’);
write(‘Nama : ‘); readln(nm);
writeln(‘Keterangan Jurusan : ‘);
writeln(’1. PKK’);
writeln(’2. D3 Informatika’);
writeln(’3. D3 Elektro’);
writeln(’4. D3 Boga Perhotelan’);
writeln(’5. PTIK’);
write(‘Jurusan (tulis no saja) : ‘); readln(nojur);
write(‘Tahun Masuk : ‘); readln(tahun);
if tahun<2004 then
begin
if nojur = 1 then
begin
spp := pkkspp;
jur := ‘PKK’
end
else if nojur = 2 then
begin
spp :=infospp;
jur := ‘D3 Informatika’;
end
else if nojur = 3 then
begin
spp :=elekspp;
jur := ‘D3 Elektro’
end
else if nojur = 4 then
begin
spp :=bogaspp;
jur := ‘D3 Boga Perhotelan’;
end
else if nojur= 5 then
begin
spp :=ptikspp;
jur := ‘PTIK’
end
else
writeln(‘Jurusan salah, tolong ulangi !!’);
end
else
begin
if nojur = 1 then
begin
spp := pkkspp;
prak:= pkkprak;
jur := ‘PKK’
end
else if nojur= 2 then
begin
spp :=infospp;
prak:= infoprak;
jur := ‘D3 Informatika’;
end
else if nojur = 3 then
begin
spp :=elekspp;
prak:=elekprak;
jur := ‘D3 Elektro’;
end
else if nojur = 4 then
begin
spp :=bogaspp;
prak:=bogaprak;
jur := ‘D3 Boga Perhotelan’;
end
else if nojur= 5 then
begin
spp :=ptikspp;
prak:=ptikprak;
jur := ‘PTIK’;
end
else
writeln(‘Jurusan salah, tolong ulangi !!’);
end;
tot := spp+prak+sehat;
writeln(‘Nama : ‘,nm);
writeln(‘Jurusan : ‘,jur);
writeln(‘Tahun Masuk : ‘,tahun);
writeln(‘Uang SPP : Rp. ‘,spp:7:2);
writeln(‘Uang Praktikum : Rp. ‘,prak:7:2);
writeln(‘Uang Kesehatan : Rp. ‘,sehat:7:2);
writeln(‘———————————’);
writeln(‘Total Pembayaran : Rp. ‘,tot:7:2);
writeln(‘=================================================’);
readln;
end.
uses crt;
const
pkkspp = 400000;
infospp = 600000;
elekspp = 500000;
bogaspp = 450000;
ptikspp = 500000;
pkkprak = 100000;
infoprak = 500000;
elekprak = 450000;
bogaprak = 600000;
ptikprak = 350000;
sehat : real = 10000;
var
nm,jur : string;
nojur : byte;
tahun :integer;
spp,prak : real;
tot : real;
begin
clrscr;
writeln(‘Administrasi Mahasiswa Fakultas Teknik dan Kejuruan’);
writeln(‘===================================================’);
write(‘Nama : ‘); readln(nm);
writeln(‘Keterangan Jurusan : ‘);
writeln(’1. PKK’);
writeln(’2. D3 Informatika’);
writeln(’3. D3 Elektro’);
writeln(’4. D3 Boga Perhotelan’);
writeln(’5. PTIK’);
write(‘Jurusan (tulis no saja) : ‘); readln(nojur);
write(‘Tahun Masuk : ‘); readln(tahun);
if tahun<2004 then
begin
if nojur = 1 then
begin
spp := pkkspp;
jur := ‘PKK’
end
else if nojur = 2 then
begin
spp :=infospp;
jur := ‘D3 Informatika’;
end
else if nojur = 3 then
begin
spp :=elekspp;
jur := ‘D3 Elektro’
end
else if nojur = 4 then
begin
spp :=bogaspp;
jur := ‘D3 Boga Perhotelan’;
end
else if nojur= 5 then
begin
spp :=ptikspp;
jur := ‘PTIK’
end
else
writeln(‘Jurusan salah, tolong ulangi !!’);
end
else
begin
if nojur = 1 then
begin
spp := pkkspp;
prak:= pkkprak;
jur := ‘PKK’
end
else if nojur= 2 then
begin
spp :=infospp;
prak:= infoprak;
jur := ‘D3 Informatika’;
end
else if nojur = 3 then
begin
spp :=elekspp;
prak:=elekprak;
jur := ‘D3 Elektro’;
end
else if nojur = 4 then
begin
spp :=bogaspp;
prak:=bogaprak;
jur := ‘D3 Boga Perhotelan’;
end
else if nojur= 5 then
begin
spp :=ptikspp;
prak:=ptikprak;
jur := ‘PTIK’;
end
else
writeln(‘Jurusan salah, tolong ulangi !!’);
end;
tot := spp+prak+sehat;
writeln(‘Nama : ‘,nm);
writeln(‘Jurusan : ‘,jur);
writeln(‘Tahun Masuk : ‘,tahun);
writeln(‘Uang SPP : Rp. ‘,spp:7:2);
writeln(‘Uang Praktikum : Rp. ‘,prak:7:2);
writeln(‘Uang Kesehatan : Rp. ‘,sehat:7:2);
writeln(‘———————————’);
writeln(‘Total Pembayaran : Rp. ‘,tot:7:2);
writeln(‘=================================================’);
readln;
end.
Mengetahui tahun kabisat
Program kabisat;
uses crt;
var
tahun : longint;
begin
clrscr;
writeln(‘=================================’);
writeln(‘Mengecek Tahun Kabisat atau Bukan’);
write(‘Masukan tahun : ‘); readln(tahun);
if tahun mod 400 = 0 then
writeln (‘Tahun ‘,tahun,’ merupakan kabisat’)
else if tahun mod 100 = 0 then
writeln (‘Tahun ‘,tahun,’ bukan merupakan kabisat’)
else if tahun mod 4 = 0 then
Download source cide lengkap nya di sini.
uses crt;
var
tahun : longint;
begin
clrscr;
writeln(‘=================================’);
writeln(‘Mengecek Tahun Kabisat atau Bukan’);
write(‘Masukan tahun : ‘); readln(tahun);
if tahun mod 400 = 0 then
writeln (‘Tahun ‘,tahun,’ merupakan kabisat’)
else if tahun mod 100 = 0 then
writeln (‘Tahun ‘,tahun,’ bukan merupakan kabisat’)
else if tahun mod 4 = 0 then
Download source cide lengkap nya di sini.
Unit Sorting
unit sort;
interface
uses crt;
type
larik = array [1..100] of integer;
var
i,j,n,y:byte;
copyL,l : larik;
procedure tukar(var a,b:integer);
procedure bubble_asc(var l:larik; n:byte);
procedure bubble_dsc(var l:larik; n:byte);
procedure select_min_asc(var l:larik; n:byte);
procedure select_min_dsc(var l:larik; n:byte);
procedure select_max_asc(var l:larik; n:byte);
procedure select_max_dsc(var l:larik; n:byte);
procedure insert_asc(var l:larik; n:byte);
procedure insert_dsc(var l:larik; n:byte);
procedure anim(var jml:byte);
implementation
procedure tukar(var a,b:integer);
var temp: integer;
begin
temp:=a;
a:=b;
b:=temp;
end;
procedure bubble_asc(var l:larik; n:byte);
begin
for i:=1 to n do
for j:=n downto i+1 do
if l[j] < l[j-1] then
begin
tukar(l[j],l[j-1])
end;
end;
procedure bubble_dsc(var l:larik; n:byte);
begin
for i:=1 to n do
for j:=n downto i+1 do
if l[j] > l[j-1] then
begin
tukar(l[j],l[j-1])
end;
end;
Pada unit ini akan terdapat prosedur – prosedur pengurutan data (sorting) dari ASC dan DESC. Juga terdapat prosedur untuk membuat animasi menu pada pascal. Keren kan….
Download source code dan *.TPU nya di sini.
interface
uses crt;
type
larik = array [1..100] of integer;
var
i,j,n,y:byte;
copyL,l : larik;
procedure tukar(var a,b:integer);
procedure bubble_asc(var l:larik; n:byte);
procedure bubble_dsc(var l:larik; n:byte);
procedure select_min_asc(var l:larik; n:byte);
procedure select_min_dsc(var l:larik; n:byte);
procedure select_max_asc(var l:larik; n:byte);
procedure select_max_dsc(var l:larik; n:byte);
procedure insert_asc(var l:larik; n:byte);
procedure insert_dsc(var l:larik; n:byte);
procedure anim(var jml:byte);
implementation
procedure tukar(var a,b:integer);
var temp: integer;
begin
temp:=a;
a:=b;
b:=temp;
end;
procedure bubble_asc(var l:larik; n:byte);
begin
for i:=1 to n do
for j:=n downto i+1 do
if l[j] < l[j-1] then
begin
tukar(l[j],l[j-1])
end;
end;
procedure bubble_dsc(var l:larik; n:byte);
begin
for i:=1 to n do
for j:=n downto i+1 do
if l[j] > l[j-1] then
begin
tukar(l[j],l[j-1])
end;
end;
Pada unit ini akan terdapat prosedur – prosedur pengurutan data (sorting) dari ASC dan DESC. Juga terdapat prosedur untuk membuat animasi menu pada pascal. Keren kan….
Download source code dan *.TPU nya di sini.
Pengguaan case
Program tokoPD;
uses crt;
const dancowb = 10000;
dancows = 4250;
dancowk = 2100;
indob = 8500;
indos = 4000;
indok = 2025;
milob = 7750;
milos = 4000;
milok = 2200;
suprib = 9600;
supris = 5100;
suprik = 2600;
sustab = 17000;
sustas = 14500;
sustak = 8300;
ovalb = 11250;
ovals = 6500;
ovalk = 3200;
var
no : byte;
ukuran : char;
banyak : longint;
bayar : real;
begin
clrscr;
writeln(‘===============================================’);
writeln(‘ P & D Toserba’);
writeln(‘Susu yang tersedia di P & D Toserba : ‘);
writeln(’1. Dancow’);
writeln(’2. Indomilk’);
writeln(’3. Milo’);
writeln(’4. Suprima’);
writeln(’5. Sustagen’);
writeln(’6. Ovaltime’);
writeln(‘————————————–’);
write(‘No susu : ‘); readln(no);
write(‘Ukuran (b:besar,s:sedang,k:kecil) : ‘); readln(ukuran);
write(‘Banyak barang : ‘); readln(banyak);
case no of
1 : begin
case ukuran of
‘b’ : bayar:=dancowb*banyak;
‘s’ : bayar:=dancows*banyak;
‘k’ : bayar:=dancowk*banyak;
else writeln(‘Ukuran salah !!’);
end;
Download source code lengkap nya di sini.
uses crt;
const dancowb = 10000;
dancows = 4250;
dancowk = 2100;
indob = 8500;
indos = 4000;
indok = 2025;
milob = 7750;
milos = 4000;
milok = 2200;
suprib = 9600;
supris = 5100;
suprik = 2600;
sustab = 17000;
sustas = 14500;
sustak = 8300;
ovalb = 11250;
ovals = 6500;
ovalk = 3200;
var
no : byte;
ukuran : char;
banyak : longint;
bayar : real;
begin
clrscr;
writeln(‘===============================================’);
writeln(‘ P & D Toserba’);
writeln(‘Susu yang tersedia di P & D Toserba : ‘);
writeln(’1. Dancow’);
writeln(’2. Indomilk’);
writeln(’3. Milo’);
writeln(’4. Suprima’);
writeln(’5. Sustagen’);
writeln(’6. Ovaltime’);
writeln(‘————————————–’);
write(‘No susu : ‘); readln(no);
write(‘Ukuran (b:besar,s:sedang,k:kecil) : ‘); readln(ukuran);
write(‘Banyak barang : ‘); readln(banyak);
case no of
1 : begin
case ukuran of
‘b’ : bayar:=dancowb*banyak;
‘s’ : bayar:=dancows*banyak;
‘k’ : bayar:=dancowk*banyak;
else writeln(‘Ukuran salah !!’);
end;
Download source code lengkap nya di sini.
Menghitung Jumlah huruf pada sebuah kata / kalimat
uses crt;
var
kata : string;
h : array ['A'..'Z'] of byte;
j : char;
i : byte;
begin
clrscr;
write(‘Input kata : ‘);readln(kata);
for i := 1 to length(kata) do
begin
for j := ‘A’ to ‘Z’ do
begin
if kata[i]= j then
begin
Download program lengkapnya di sini
var
kata : string;
h : array ['A'..'Z'] of byte;
j : char;
i : byte;
begin
clrscr;
write(‘Input kata : ‘);readln(kata);
for i := 1 to length(kata) do
begin
for j := ‘A’ to ‘Z’ do
begin
if kata[i]= j then
begin
Download program lengkapnya di sini
Gaji Pegawai
Program Gaji;
uses crt;
var
nama,alamat : string;
gaji_pkok,tunjangan,pajak,bersih : real;
begin
clrscr;
write(‘Nama Pegawai : ‘); readln(nama);
write(‘Alamat : ‘); readln(alamat);
write(‘Gaji Pokok : ‘);readln(gaji_pkok);
tunjangan := 15/100*gaji_pkok;
pajak := 7.5/100*gaji_pkok;
bersih :=
Download source code lengkap nya di sini.
uses crt;
var
nama,alamat : string;
gaji_pkok,tunjangan,pajak,bersih : real;
begin
clrscr;
write(‘Nama Pegawai : ‘); readln(nama);
write(‘Alamat : ‘); readln(alamat);
write(‘Gaji Pokok : ‘);readln(gaji_pkok);
tunjangan := 15/100*gaji_pkok;
pajak := 7.5/100*gaji_pkok;
bersih :=
Download source code lengkap nya di sini.
Metode Bagi dua
uses crt;
const epsilon=0.00001;
var
a,b,c,fa,fb,fc : real;
begin
writeln(‘Mencari akar dari persamaan f(x)=(x^3 + 1)/3′);
writeln(‘ Dengan Metode Bagi Dua’);
writeln(‘============================================’);
write(‘Masukkan batas awal(a) : ‘); readln(a);
fa:=(a*a + 1)/3;
writeln(‘f(a) = ‘,fa:0:5);
repeat
write(‘Masukkan batas akhir(b) : ‘); readln(b);
fb:=(b*b +1)/3;
writeln(‘f(b) = ‘,fb:0:5);
if fa*fb < 0 then
begin
writeln(‘Syarat OK (f(a)*f(b)<0)’);
writeln(‘f(a)*f(b) = ‘,(fa*fb):0:5);
end
else
Download di sini untuk source code lengkap nya..
Komen yaw..
const epsilon=0.00001;
var
a,b,c,fa,fb,fc : real;
begin
writeln(‘Mencari akar dari persamaan f(x)=(x^3 + 1)/3′);
writeln(‘ Dengan Metode Bagi Dua’);
writeln(‘============================================’);
write(‘Masukkan batas awal(a) : ‘); readln(a);
fa:=(a*a + 1)/3;
writeln(‘f(a) = ‘,fa:0:5);
repeat
write(‘Masukkan batas akhir(b) : ‘); readln(b);
fb:=(b*b +1)/3;
writeln(‘f(b) = ‘,fb:0:5);
if fa*fb < 0 then
begin
writeln(‘Syarat OK (f(a)*f(b)<0)’);
writeln(‘f(a)*f(b) = ‘,(fa*fb):0:5);
end
else
Download di sini untuk source code lengkap nya..
Komen yaw..
Regula Falsi
program regula_falsi;
uses crt;
label ulang;
var
x1,x2,x3,y1,y2,y3 : real;
i : integer;
Ab :char;
data1 : real;
begin
ulang:
clrscr;
writeln(‘Tentukan nilai akar dari persamaan f(x)=x^3+x^2-3x-3=0 dengan Regula Falsi’);
write(‘Masukan nilai x1 = ‘);readln(x1);
y1 := x1 * x1 * x1 + x1 * x1 – 3 * x1 – 3;
writeln(‘ Nilai f(x1)= ‘,y1:0:4);
repeat
begin
write( ‘Masukan nilai x2 = ‘ ); readln(x2);
y2 := x2 * x2 * x2 + x2 * x2 – 3 * x2 – 3;
write(‘ Nilai f(x2)= ‘,y2:0:4);
end;
if (y1*y2)<0 then
Writeln(‘ Syarat Nilai Ok’)
else
Writeln(‘ Nilai X2 Belum Sesuai’);
until ( y1 * y2 ) <0;
writeln;
writeln(‘Penyelesaian persamaan karekteristik dengan metoda regula falsi’);
writeln(‘———————————————————————-’);
writeln(‘ n x f(x) error ‘);
writeln(‘———————————————————————-’);
repeat
begin
i:= i + 1; x3 := ( x2-( y2 / ( y2 – y1))*(x2-x1));
y3 := x3 * x3 * x3 + x3 * x3 – 3 * x3 – 3;
if i<10 then
writeln(‘ ‘,i,’ : ‘,x3,’ : ‘,y3,’ : ‘,abs(y3),’ : ‘)
else
writeln(i,’ : ‘,x3,’ : ‘,y3,’ : ‘,abs(y3),’ : ‘);
if ( y1 * y3 ) <0 then
begin
x2 := x3 ; y2 := y3 ;
end
else
begin
x1 := x3 ; y1 := y3;
end;
end;
until abs( y3 ) < 1E-08;
writeln(‘———————————————————————-’);
writeln(‘Akar persamaannya= ‘,x3);
writeln(‘Errornya=’ ,abs( y3 ));
writeln(‘———————————————————————-’);
writeln(‘Apakah anda ingin mengulangi (y/t): ‘);
readln(ab);
if (ab=’y') or (ab=’Y') then
goto ulang;
end.
uses crt;
label ulang;
var
x1,x2,x3,y1,y2,y3 : real;
i : integer;
Ab :char;
data1 : real;
begin
ulang:
clrscr;
writeln(‘Tentukan nilai akar dari persamaan f(x)=x^3+x^2-3x-3=0 dengan Regula Falsi’);
write(‘Masukan nilai x1 = ‘);readln(x1);
y1 := x1 * x1 * x1 + x1 * x1 – 3 * x1 – 3;
writeln(‘ Nilai f(x1)= ‘,y1:0:4);
repeat
begin
write( ‘Masukan nilai x2 = ‘ ); readln(x2);
y2 := x2 * x2 * x2 + x2 * x2 – 3 * x2 – 3;
write(‘ Nilai f(x2)= ‘,y2:0:4);
end;
if (y1*y2)<0 then
Writeln(‘ Syarat Nilai Ok’)
else
Writeln(‘ Nilai X2 Belum Sesuai’);
until ( y1 * y2 ) <0;
writeln;
writeln(‘Penyelesaian persamaan karekteristik dengan metoda regula falsi’);
writeln(‘———————————————————————-’);
writeln(‘ n x f(x) error ‘);
writeln(‘———————————————————————-’);
repeat
begin
i:= i + 1; x3 := ( x2-( y2 / ( y2 – y1))*(x2-x1));
y3 := x3 * x3 * x3 + x3 * x3 – 3 * x3 – 3;
if i<10 then
writeln(‘ ‘,i,’ : ‘,x3,’ : ‘,y3,’ : ‘,abs(y3),’ : ‘)
else
writeln(i,’ : ‘,x3,’ : ‘,y3,’ : ‘,abs(y3),’ : ‘);
if ( y1 * y3 ) <0 then
begin
x2 := x3 ; y2 := y3 ;
end
else
begin
x1 := x3 ; y1 := y3;
end;
end;
until abs( y3 ) < 1E-08;
writeln(‘———————————————————————-’);
writeln(‘Akar persamaannya= ‘,x3);
writeln(‘Errornya=’ ,abs( y3 ));
writeln(‘———————————————————————-’);
writeln(‘Apakah anda ingin mengulangi (y/t): ‘);
readln(ab);
if (ab=’y') or (ab=’Y') then
goto ulang;
end.
Faktorial
Program FAKTORIAL;
uses crt;
var Faktor : real;
Cacah,
Bil_Awal,
Bil_Akhir,
Konter,
Baris : integer;
begin
clrscr;
writeln(‘MEMBUAT TABEL FAKTORIAL’);
write(‘BILANGAN AWAL : ‘);readln(Bil_Awal);
write(‘BILANGAN AKHIR : ‘);readln(Bil_Akhir);writeln;
writeln(‘ TABEL FAKTORIAL’);
writeln;
writeln(‘——————————–’);
writeln(‘ BILANGAN HARGA FAKTORIAL’);
writeln(‘——————————–’);writeln;
Baris := 11;
for Cacah := Bil_Awal to Bil_Akhir do
Mau tau lanjutannya download aj y..Di sini..
uses crt;
var Faktor : real;
Cacah,
Bil_Awal,
Bil_Akhir,
Konter,
Baris : integer;
begin
clrscr;
writeln(‘MEMBUAT TABEL FAKTORIAL’);
write(‘BILANGAN AWAL : ‘);readln(Bil_Awal);
write(‘BILANGAN AKHIR : ‘);readln(Bil_Akhir);writeln;
writeln(‘ TABEL FAKTORIAL’);
writeln;
writeln(‘——————————–’);
writeln(‘ BILANGAN HARGA FAKTORIAL’);
writeln(‘——————————–’);writeln;
Baris := 11;
for Cacah := Bil_Awal to Bil_Akhir do
Mau tau lanjutannya download aj y..Di sini..
Selasa, 23 September 2008
Unit Search
unit search;
interface
uses crt;
type larik = array [1..100] of integer;
var
i,n, y : byte;
x : integer;
l : larik;
found: boolean;
procedure sequential (var l : larik; x : integer; n:byte);
procedure binary (var l : larik;x: integer; n:byte);
implementation
procedure sequential (var l : larik; x : integer; n:byte);
begin
i:=1;
found := false;
while (not found) and (i<=n) do
begin
if x=l[i] then
found := true
else
i := i +1;
end;
clrscr;
if found then
writeln(‘Elemen yang bernilai ‘,x,’ berada pada index ke ‘,i)
else
writeln(‘Elemen yang bernilai ‘,x,’ tidak ada pada semua index’);
writeln(‘===========================’);
writeln(‘ Index ke- Nilai Data’);
writeln(‘—————————’);
y := 5;
for i := 1 to n do
begin
gotoxy(6,y);
writeln(i);
gotoxy(21,y);
writeln(l[i]);
inc(y);
end;
writeln(‘===========================’);
end;
procedure binary (var l : larik; x :integer; n:byte);
var
a,iA,iAk,iT : byte;
kondisi : char;
temp : integer;
j : byte;
begin
{prosedur mengurutkan data}
{—————————————}
for i := 1 to (n-1) do
for j := n downto (i+1) do
if l[j] < l[(j-1)] then
begin
temp := l[j];
l[j] := l[(j-1)];
l[(j-1)] := temp;
end;
{—————————————}
a:=0;
iA :=1;
iAk :=n;
found :=false;
while ( not found) and (iA<=iAk) do
begin
iT:=(iA+iAk) div 2;
inc(a);
writeln(‘Iterasi ke ‘,a);
writeln(‘iA = ‘,iA);
Unit di atas adalah unit yang berisi prosedur – prosedur searching data. Yaitu prosedur binary dan sequential. Download di sini untuk source code dan file *.TPU nya.
Untuk memanggil Unit tersebut maka diperlukan sebuah program.
Program searching;
uses crt,search;
var
option : char;
begin
clrscr;
write(‘Masukkan banyak data : ‘);
readln(n);
Download source code nya di sini.
interface
uses crt;
type larik = array [1..100] of integer;
var
i,n, y : byte;
x : integer;
l : larik;
found: boolean;
procedure sequential (var l : larik; x : integer; n:byte);
procedure binary (var l : larik;x: integer; n:byte);
implementation
procedure sequential (var l : larik; x : integer; n:byte);
begin
i:=1;
found := false;
while (not found) and (i<=n) do
begin
if x=l[i] then
found := true
else
i := i +1;
end;
clrscr;
if found then
writeln(‘Elemen yang bernilai ‘,x,’ berada pada index ke ‘,i)
else
writeln(‘Elemen yang bernilai ‘,x,’ tidak ada pada semua index’);
writeln(‘===========================’);
writeln(‘ Index ke- Nilai Data’);
writeln(‘—————————’);
y := 5;
for i := 1 to n do
begin
gotoxy(6,y);
writeln(i);
gotoxy(21,y);
writeln(l[i]);
inc(y);
end;
writeln(‘===========================’);
end;
procedure binary (var l : larik; x :integer; n:byte);
var
a,iA,iAk,iT : byte;
kondisi : char;
temp : integer;
j : byte;
begin
{prosedur mengurutkan data}
{—————————————}
for i := 1 to (n-1) do
for j := n downto (i+1) do
if l[j] < l[(j-1)] then
begin
temp := l[j];
l[j] := l[(j-1)];
l[(j-1)] := temp;
end;
{—————————————}
a:=0;
iA :=1;
iAk :=n;
found :=false;
while ( not found) and (iA<=iAk) do
begin
iT:=(iA+iAk) div 2;
inc(a);
writeln(‘Iterasi ke ‘,a);
writeln(‘iA = ‘,iA);
Unit di atas adalah unit yang berisi prosedur – prosedur searching data. Yaitu prosedur binary dan sequential. Download di sini untuk source code dan file *.TPU nya.
Untuk memanggil Unit tersebut maka diperlukan sebuah program.
Program searching;
uses crt,search;
var
option : char;
begin
clrscr;
write(‘Masukkan banyak data : ‘);
readln(n);
Download source code nya di sini.
Belum ada komentar.
Comments RSS TrackBack Identifier URI
Tinggalkan Balasan Batalkan balasan